Cycle Exterior Emulsion

About This Product

Cycle Exterior Emulsion is a water-based acrylic exterior wall paint that provides reliable weather protection at an economy price. UV-stabilised pigments ensure colour retention over the warranty period, while the anti-fungal biocide inhibits algae and mould growth on the paint film.

When used as part of the complete Cycle Exterior System — Cycle Exterior Primer followed by 2 coats of Cycle Exterior Emulsion — the product carries a 5-year system warranty. This makes Cycle one of the most cost-effective warranted exterior paint systems available in the Indian market.

Ideal Applications

🏘️

Affordable Housing Projects

Economy exterior system with 5-year warranty for developer projects.

🏗️

Mass Builder Projects

Large-scale exterior painting at optimal cost per square foot.

🏫

Institutional Buildings

Schools, colleges, government and public buildings.

🔄

Repaint Projects

Economy repaint on existing exterior walls.

Technical Specifications

Base	Acrylic emulsion, water-based
Finish	Matte / low sheen
VOC Level	Standard VOC
Drying Time	Touch dry: 2 hrs \| Recoat: 6 hrs
Coverage	105–120 sq ft per litre per coat
Coats Required	Minimum 2 coats
Dilution	Up to 10% water
Pack Sizes	4L, 10L, 20L
System Warranty	5 years — full Cycle system
Biocide	Anti-fungal, anti-algae

System Coverage

Coverage varies by surface texture, porosity and application method. Contact our technical team for project-specific estimates.

Coverage Guide

Smooth rendered facade115–120 sq ft/L

Standard cement plaster105–115 sq ft/L

Rough sand-faced90–105 sq ft/L

Application Steps

Surface Preparation

Clean exterior surface. Remove loose paint, algae and dirt. Allow new plaster 28 days cure.

Apply Cycle Exterior Primer

1–2 coats Cycle Exterior Primer or Cycle Multi Primer. Allow 6 hours.

First Coat

Apply at full consistency with medium-nap roller. Work top to bottom.

Second Coat

Apply after 6 hours minimum. Check for holidays before declaring complete.

Tools & Tips

Recommended Tools

🎨Medium nap roller 12–15mm

🖌️4–6 inch brush for masonry details

💨Airless spray for large facades

Pro Tips

—Apply only when rain is not expected for 24 hours.

—Avoid application in direct midday sun.

—Anti-fungal performance depends on clean primer base — don't skip the primer.

Complete Paint System

The Cycle 5-Year Exterior System Warranty applies when Cycle Exterior Primer + Cycle Exterior Emulsion (min 2 coats) are applied per application guidelines.

Recommended System

1Surface PreparationClean, cured exterior masonry

2Cycle Exterior Primer1–2 coats, allow 6 hrs

3Cycle Exterior Emulsion2 coats minimum, 6 hrs apartThis Product

Warranty Conditions

✓Full Cycle system must be used — primer and topcoat from Cycle range

✓Surface must be clean, dry and properly prepared before application

✓Minimum 2 coats of topcoat applied as per application guide

✓Normal weathering conditions apply

✓Contact our dealer for warranty documentation

Technical Support Our team provides free specification support for builders, architects and contractors. Contact us for project-specific system recommendations.