Cycle Interior Emulsion

About This Product

Cycle Interior Emulsion is a water-based acrylic emulsion that delivers a smooth, washable matte finish on interior walls and ceilings. While it does not carry the advanced performance features of Vegam Interior Emulsion, it provides reliable coverage, adequate washability and satisfactory colour retention at a significantly lower cost.

The ideal choice for large-volume builder projects, rental properties and any interior space where good-quality finish is needed but premium specification is not required.

Ideal Applications

🏘️

Residential Projects — Builder Grade

Reliable interior emulsion for standard residential construction.

🏢

Budget Commercial Interiors

Offices, warehouses and commercial spaces with practical finish requirements.

🔄

Rental Properties

Durable-enough finish for frequent repainting at rental properties.

🏗️

Volume Builder Projects

Consistent, cost-effective finish across large residential developments.

Technical Specifications

Base	Acrylic emulsion, water-based
Finish	Smooth matte / low sheen
VOC Level	Standard VOC
Drying Time	Touch dry: 1.5 hrs \| Recoat: 4 hrs
Coverage	110–130 sq ft per litre per coat
Coats Required	Minimum 2 coats
Dilution	Up to 15% water
Pack Sizes	1L, 4L, 10L, 20L
Washability	Mild wash — not heavy scrub
Tintable	Standard colour range

System Coverage

Coverage varies by surface texture, porosity and application method. Contact our technical team for project-specific estimates.

Coverage Guide

Smooth plaster120–130 sq ft/L

Medium texture105–120 sq ft/L

Old / porous walls95–110 sq ft/L

Application Steps

Surface Preparation

Ensure walls are clean, dry and sound. Fill cracks. Allow new plaster to cure 28 days.

Apply Cycle Interior Primer

Apply 1 coat Cycle Interior Primer or Cycle Multi Primer. Allow 4 hours cure.

First Coat

Dilute up to 15% water. Apply with roller or brush. Allow 4 hours before second coat.

Second Coat

Apply second coat at full consistency for maximum coverage and colour depth.

Tools & Tips

Recommended Tools

🎨Short nap roller 9mm

🖌️3–4 inch brush for cut-in

💨Spray — dilute to 15%

Pro Tips

—For better colour uniformity, use a tinted primer base matching the topcoat colour.

—Two coats minimum — one heavy coat does not equal two standard coats in performance.

Complete Paint System

Part of the Cycle 3-Year Interior System. Use with Cycle Interior Primer for warranty qualification.

Recommended System

1Surface PreparationClean, dry plaster wall

2Cycle Interior Primer1 coat, allow 4 hrs

3Cycle Interior Emulsion2 coats minimumThis Product

Warranty Conditions

✓Full Cycle system must be used — primer and topcoat from Cycle range

✓Surface must be clean, dry and properly prepared before application

✓Minimum 2 coats of topcoat applied as per application guide

✓Normal weathering conditions apply

✓Contact our dealer for warranty documentation

Technical Support Our team provides free specification support for builders, architects and contractors. Contact us for project-specific system recommendations.